manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 21

21

PC INTERFACE

Interface with a PC is accomplished by connecting the CompuMask to a PC USB Port using

the ACI (AERIS Computer Interface) USB Interface Cable.  The same Cable is used for

Upload and Download.

The software program is on the ACI CD, together with a USB Driver.  The program's Help

section serves as the User Manual and can be printed for personal use.  The Settings

Upload portion of the program is used to check the CompuMask's existing Settings and for

entering settings into the CompuMask.  The Data Download portion of the program is used

to retrieve Data that was sampled during dives and stored in the CompuMask's memory.

The CompuMask checks for an External Access request once every second while in Sur-

face Mode.  Checks are not made if the unit is WET.  For a connection to be made, the

ACI Cable is plugged into the CompuMask's Data Port and plugged into a PC USB Port.

To establish the connection, the ACI PC program must be running.  When the connection is

made, all segments of the CompuMask appear on the display until completion of the

Upload or Download operation.

  The CompuMask reverts to the Surface Mode Main screen after completion of the

Upload or Download operation, or after 2 minutes if no ACI PC program action was

taken.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands