manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 50

50

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will accept the

Second Digit of the Code and/or advance to the Third Digit which will be flashing.

  Pressing and releasing the S (Side) button repeatedly (< 2 seconds each time) will

increase the Third Digit from 0 to 9 in increments of 1.

  Depressing and holding the S (Side) button will scroll through the Set Points at a rate

of 4 per second.

  Pressing and releasing the A (Top) button (< 2 seconds) will accept the Third Digit of

the Code and/or advance to the Fourth Digit which will be flashing.

  Pressing and releasing the S (Side) button repeatedly (< 2 seconds each time) will

increase the Fourth Digit from 0 to 9 in increments of 1.

  Depressing and holding the S (Side) button will scroll through the Set Points at a rate

of 4 per second.

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will accept the

Fourth Digit of the Code and/or advance to the Fifth Digit which will be flashing.

  Pressing and releasing the S (Side) button repeatedly (< 2 seconds each time) will

increase the Fifth Digit from 0 to 9 in increments of 1.

  Depressing and holding the S (Side) button will scroll through the Set Points at a rate

of 4 per second.

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will accept the

Fifth Digit of the Code, save the setting, and revert to the SET U screen.

  If no button is pressed for a period of 2 minutes, operation will revert to the NOR (or

GAU) SURF MAIN screen.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands