manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 119

119

FREE DIVE ALARMS

All FREE Dive Alarms will sound 3 short beeps (either 1 or 2

times) and flash the associated parameter as an indication that

an event is occurring and as a reminder to view the display to

identify the event.  After the beeps have sounded, the flashing

will stop.

FREE DIVE Alarms are separate and unaffected by NOR/GAU

Mode Alarm Settings.  The Alarms for those Modes are separate

and unaffected by FREE DIVE Alarm Settings.

FREE DIVE EDT (Elapsed Dive Time) ALARM

When the FREE EDT Alarm is set ON prior to commencing a

FREE Dive, 3 short beeps will sound and Elapsed Dive Time

(min:sec value) will flash on the MAIN screen (Fig. 107).

This FREE DIVE Alarm is factory set to repeat every 30 seconds

when set ON.

FREE CDT (Count Down Timer) ALARM

When the FREE CDT decreases to 0:00 (min:sec), 3 short beeps

will sound 3 times and the graphic Cdt (meaning Count Down

Timer) will flash on the MAIN screen in place of NDC time (Fig.

108).  NDC time will be restored after the beeps stop.

Fig. 107 - FREE DIVE EDT

ALARM

Fig. 108 - FREE DIVE CDT

ALARM

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands