manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 26

26

OPERATING MODES

The CompuMask features 3 Operating Modes >>

  NOR - for Normal Air or Nitrox dives

  GAU - for dives with no Nitrogen/Oxygen calculations

  FRE - for dives with no SCUBA

REMINDER:  Once a dive is made in GAU Mode,

the CompuMask is locked into that Operating

Mode for 24 hours after the dive.

SURFACE MODE

After activation and while the default Surface Main screen is

displayed, depressing the A (Top) button for 4 sec each time

steps through the operating mode Surface Main screens.

  Fig. 14 - NOR MAIN >> GAU MAIN >> FRE MAIN

  The Operating Mode selected (NOR, GAU, or FRE) will

remain on display for 2 hours until a dive is made or

another Operating Mode is selected.

If a dive has been conducted within the past 24 hours, the SURF

MAIN screen for that mode will be displayed until changed.

While operating in any Surface Mode, the CompuMask will

enter Dive Mode upon descent to 5 FT (1.5 M) for 5 seconds.

Fig. 14C - FRE SURF MAIN

Fig. 14A - NOR SURF MAIN

Fig. 14B - GAU SURF MAIN

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands