manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 57

57

  While in the PLAN MODE, pressing and releasing the S (Side) button repeatedly (< 2

seconds each time) will increase the Planned Depth in increments of 10 FT (3 M),

displaying the information one screen at a time.

Information provided includes Depths and allowable No Decompression Dive Times. The

screens will sequence through Depths from 30 to 190 FT (9 to 57 M), or the Maximum

Depth that will allow theoretical No Decompression Dive Time of at least 1 minute based

upon the previous dive profiles in a series of repetitive dives and taking into account

descent and ascent rates of 60 FPM (18 MPM).

NOTE:  When the Conservative Factor is set ON, No Decompression

Dive times are reduced to the values of the next 3000 foot (915

meter) higher Altitude.  See tables in the Reference section.

If FO2 is set for a numerical value (21 to 50%), the Nx (Nitrox) icon and Maximum

Operating Depth defined by the PO2 ALARM Set Point will be displayed.

If the limiting time factor is Nitrogen controlled, the symbols TIME and NDC will be dis-

played.  If the limiting time factor is Oxygen controlled, the symbols TIME and O2 will be

displayed.

  Prior to a first dive of a series, pressing and releasing the A (Top) button momentarily

(< 2  seconds) will advance to LOG MODE.

  After a dive is made, it will advance to FLY MODE.

  If no button is pressed during a 2 minute period, operation will revert to the NOR

SURF MAIN screen.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands