manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 48

48

SET SAMPLING RATE, information includes (Fig. 36):

>  Graphic Sr (meaning Sampling Rate)

>  Set Point (sec), flashing

>  Graphic SEC (seconds)

  Pressing and releasing the S (Side) button momentarily and

repeatedly (< 2 seconds each time) will step through the Set

Points of 2, 15, 30, 60 (seconds).

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will save the setting and/or advance to the SET

Transmitter Link Code screen with the Set Point  flashing.

  Pressing and releasing the A (Top) button momentarily and

repeatedly (< 2 seconds each time) will step through the

other SET U screens.

  Depressing the A (Top) button for 2 seconds will save the

setting and revert to the SET U screen.

  If no button is pressed for a period of 2 minutes, operation

will revert to the NOR (or GAU) SURF MAIN screen.

FREE Dive Mode has a separate fixed Sampling Rate of 1

second.

Fig. 36 - SET SAMPLING

RATE

SAMPLING RATE is

the frequency (time

interval) at which

data is sampled and

stored in memory for

subsequent down-

load to the ACI PC

program.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands