manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 14

14

GAUGE Surface Mode allows access to ALT (Alternate) Displays, Set, Fly, Log, and History

Modes.  It also displays Tank Pressure.

FRE Mode allows access to sub modes by first accessing NOR Surface Mode.  It does not

display Tank Pressure.

Once a dive is made in GAUGE Mode, the CompuMask is locked into that Mode for 24

hours after the dive.

AUDIBLE ALARM

Most warning situations that activate the Audible Alarm while operating in NOR or GAU

Mode cause the CompuMask to emit 1 beep per second for 10 seconds, or until the

situation is corrected, or it is acknowledged by momentarily pressing and releasing the A

(Top) button (less than 2 seconds).  After being acknowledged and the situation corrected,

the Alarm will sound again upon reentry into the warning situation, or entry into another

type of warning situation.

FRE Dive Mode has its own set of Alarms which emit 3 short beeps either 1 or 3 times

which cannot be acknowledged.

If the Backlight is OFF, it will come ON at any time at the Level set during the time that an

Alarm strikes even when set OFF.  It will remain ON until the Alarm condition is corrected

or clears, even if the S (Side) button is pressed in an attempt to turn it OFF.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands