manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 32

32

SET F GROUP (FO2)

Set F Sequence:

SET F > FO2 > FO2 Default.

>  Depressing the S (Side) button for 4 seconds while the NOR

or GAU SURF MAIN screen is displayed will access SET F

identified by the graphic SEtF (Fig. 19).

>  Pressing and releasing the A (Top) button momentarily (< 2

seconds) while SET F is displayed will access the SET FO2

screen with the Set Point flashing.

>  Depressing the A (Top) button for 2 seconds while SET F is

displayed will exit the Set Menu and revert to the SURF MAIN.

Setting FO2 for NOR Nitrox Dives:

For each numerical value of FO2 displayed, the MOD (Maximum Operating Depth) that

can be achieved for the PO2 Alarm Set Point limit previously set will be displayed.

NOTE:  The MODs will change if the PO2 Alarm Set Point is changed

after setting FO2.

When the FO2 DEFAULT is set ON and FO2 is set for a numerical value, 10 minutes after

surfacing from that dive FO2 will be displayed as 50 (%) and further repetitive dives will

be calculated based on 50% O2 for oxygen calculations and 21% O2 for Nitrogen

calculations (79% Nitrogen), unless FO2 is set to another numerical value before the dive.

Fig. 19 - SET F (FO2)

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands