manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 38

38

SET EDT (ELAPSED DIVE TIME) ALARM,

information includes (Fig. 25):

>  Graphic Edt (meaning Elapsed Dive Time) and MAX icon

>  Set Point value (hr:min), flashing, and EDT icon.

  Pressing and releasing the S (Side) button momentarily (< 2

seconds) will increase the Set Point from 0:10 to 3:00

(hours:minutes) in 5 minute (:05) increments.

  Depressing the S (Side) button will scroll through the Set

Points at a rate of 4 Set Points per second until it is

released.

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will save the setting and/or advance to the SET

TLBG (Tissue Loading Bar Graph) ALARM screen with the

Set Point flashing.

  Pressing and releasing the A (Top) button repeatedly (< 2

seconds each) will step through the other SET A screens.

  Depressing the A (Top) button for 2 seconds will save the

setting and revert to the SET A screen.

  If no button is pressed for 2 minutes, operation will revert to

the NOR (or GAU) SURF MAIN screen.

Fig. 25 - Set Depth Alarm

FREE Dive Mode has

a separate (fixed)

EDT Alarm.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands