manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 103

103

Fig. 91 - GAU SURF ALT

  Depress/hold the A (Top) button for 2 seconds to access the

SET menu (G > F > A > U > T).

NOTE:  Once a dive is conducted in GAU Operat-

ing Mode, you must wait 24 hours after surfac-

ing before the CompuMask resets and will oper-

ate in NOR Mode (Air or Nitrox) or FRE Dive

Mode.

GAU SURF ALT, information includes (Fig. 91) -

>  Altitude level graphic EL - 2 to EL - 7 (when > 3,000 feet)

>  Time of Day (hr:min)

>  Graphic Am or Pm, if set for 12 Hour Format

>  Temperature with degrees icon and graphic F (or C)

  Press the S (Side) button to toggle the Backlight.

  Press/release the A (Top) button as necessary to access FLY, LOG, and HISTORY,

similar to NOR Mode.

>  The display will revert to the MAIN Display after 5 seconds if A is not pressed.

Upon descending to 5 FT (1.5 M), the CompuMask will enter GAU DIVE Mode.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands