manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 82

82

SETTING THE BACKLIGHT LEVEL

>  Backlight Level is the % of the Backlight’s full (100%) power of illumination.

>  Backlight Level can be set during dives in any of the 3 Operating Modes.

  Depressing the S (Side) button for 2 seconds while the DIVE MAIN screen is displayed

will access the Set Backlight Level (GLO.L) screen.

Set Backlight Level, information includes (Fig. 71):

>  Graphic GLO.L (GLO means Backlight, L means Level)

>  Set Point (%), flashing

  Pressing and releasing the S (Side) button repeatedly (< 2 sec each time) will step

through the Set Points of 5 (minimum), 25, 50, 75, and 100%, then repeat the step

through.

>  As the Set Point changes, the actual Level of illumination of the Mask's LCD will

change allowing you to see which Level setting you prefer.

  pressing and releasing the A (Top) button (< 2 sec) will save

    the setting and revert back to the NOR DIVE MAIN screen.

  If no button is pressed during a period of 30 seconds,

    the Set Point will remain as previously set and operation will

    revert to the MAIN screen.

Fig. 71 - SET BACKLIGHT

LEVEL

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands