manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 71

71

An interruption lasting greater than 15 seconds will cause the

Tank Pressure value and the Link (Signal) icon to flash on the

Mask's display (Fig. 56).  An interruption of the Link may also

occur while operating -

  within 3 feet (1 meter) of a running Dive Propulsion Vehicle.

  when using a Strobe (a temporary interruption may occur

shortly after the Strobe flashes).

  within 6 feet (2 meters) of a PC CRT monitor, in which case

the Mask and Transmitter may have to be moved to within

inches of each other to maintain the Link.

The Link will be restored within 4 seconds after the above

conditions are corrected.

DIVE TIME REMAINING (DTR)

One of the most important pieces of information on AERIS dive

computers is the Dive Time Remaining numeric display.  The

CompuMask constantly monitors No Decompression status,

Oxygen Accumulation, and Air Consumption Rate.

The Dive Time Remaining display (Fig. 57a) will indicate the No

Deco (NDC), O2 (OTR), or Air Time (ATR) Remaining, whichever

Time is the least amount available.  The specific Time being

displayed is identified by the NDC or OTR or ATR icons.

Fig. 56 - LOSS OF LINK

Fig. 57 - DIVE TIME

REMAINING

a

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands