manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 110

110

FREE SURF ALT 1, information includes (Fig. 96) -

>  Maximum Depth of the FREE dive previously made while still

in FREE Mode with FT (or M) and MAX icons

>  Elapsed Dive Time (min:sec) of the FREE dive previously

made while still in FREE Mode with EDT icon (resets to 0:00

after 24 hours)

>  Graphic LSt (indicating data refers to the Last dive)

  Press and release the A (Top) button (< 2 seconds) to view

FREE SURF ALT 2.

  Press the S (Side) button to toggle the Backlight.

The display will revert to the FRE SURF MAIN screen after 5

seconds unless the A (Top) button is pressed.

FREE SURF ALT 2, information includes (Fig. 97) -

>  Altitude level graphic EL - 2 to EL - 7 (when > 3,000 feet)

>  Time of Day (hr:min), with Am (or Pm) if 12 Hour Format

>  Temperature with degrees icon and graphic F (or C)

  The display will revert to the FREE SURF MAIN screen after

5 seconds or if A is pressed.

Fig. 97 - FREE SURF ALT 2

Fig. 96 - FREE SURF ALT 1

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands