manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 129

129

To Obtain Service:

Take your CompuMask system (Mask and Transmitter) to an Authorized AERIS Dealer.

To return your CompuMask to AERIS:

  Record all dive data in the Log and/or download the data in memory.  All data will

be erased during factory service.

  Package it using a protective cushioning material.

  If shipping to AERIS, obtain an RA (Return Authorization) number by contacting AERIS

at 510/346-0010 or send an e-mail to [email protected].

  Include a legible note stating the specific reason for return, your name, address,

daytime phone number, serial number(s), and a copy of your original sales receipt.

  Send freight prepaid and insured using a traceable method to AERIS.

  Non-warranty service must be prepaid.  COD is not accepted.

  Additional information is available at the AERIS web site.

diveaeris.com

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands