manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 30

30

NOTE:  Operation of the S (Side) button while in

a Set Menu will not turn the Backlight OFF as it

does while operating in other modes.

SET G GROUP (G = GLO = BACKLIGHT)

Set G Sequence:

SET G > GLO.L (Level)

NOTE:  Backlight Level can be set while on the

surface and during dives in any of the 3 Operat-

ing Modes.

Depressing the S (Side) button for 2 seconds while the SURF

MAIN screen is displayed will access the SET G screen identified

by the graphic SEtG (Fig. 17).

Pressing and releasing the A (Top) button momentarily (less than

2 seconds), while SET G is displayed, will advance to SET L

(Level) with the Set Point flashing.

Depressing the S (Side) button for 2 seconds while SET G is

displayed will bypass SET G and advance to SET A.

Depressing the A (Top) button for 2 seconds while SET G is

displayed will exit the Set Menu and revert to the SURF MAIN.

Fig. 17 - SET G

(BACKLIGHT)

GAU and FRE

Operating Modes

are also

described in

separate sections

of this manual.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands