manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 13

13

OPERATING MODE STRUCTURE

The A (Top) button is used to access 3 Operating Modes (Fig. 1)

that include NOR (Normal Air/Nitrox Dive Computer), GAU

(Digital Gauge Mode), and FRE (Free Dive Mode).

The screens of the Main Modes and Sub Modes will remain on

display until a button is pressed to access another screen or

Mode, activate a sequence, or for 2 minutes if no button is

pressed.

When Wet Activation is set ON, the CompuMask will enter the

selected Dive Mode upon descent to 5 FT (feet) /1.5 M (meters),

regardless of what surface screen is displayed at the time.

WARNING:  When Wet Activation is set OFF, the

CompuMask must be activated by push button

prior to the first dive of a new series.  Com-

mencing a dive will not activate Dive Mode

unless Wet Activation is set ON or the unit is

activated.

Entering Settings and Plan Mode are available in NOR SURF

Mode which also allows access to ALT (Alternate) Displays, Set,

Plan, Fly, Desat, Log, and History Modes.  Tank Pressure is

displayed if a Transmitter is active and Linked with the

CompuMask.

Fig. 1 - OPERATING MODES

NORMAL (AIR/NITROX)

FREE DIVE

GAUGE

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands