manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 85

85

NO D SAFETY STOP ALT 3, information includes (Fig. 75) -

>  Time of Day (hr:min)

>  Graphic Am or Pm, if set for 12 Hour Format

>  Temperature with degrees icon and graphic F (or C)

  The display will revert to the MAIN Display after 5 seconds

or if A is pressed/released (< 2 seconds).

DECOMPRESSION DIVE MODE

The CompuMask is designed to help you by providing a repre-

sentation of how close you are to entering Decompression.

Decompression Dive Mode activates when theoretical No

Decompression time and depth limits are exceeded.

Upon Entry into Decompression, the Audible Alarm will sound

and the TLBG and UP Arrow will flash (Fig. 76) until acknowl-

edged or for 10 seconds (unless set OFF), then the TLBG will

stop flashing.

  Depress the A (Top) button for 2 seconds to acknowledge/

silence the Audible Alarm.

>  The UP Arrow will flash if you are greater than 10 FT (3 M)

deeper than the Required Stop Depth.

>  Once you are within 10 FT (3 M) of, and below, the

Required Stop Depth, the UP Arrow will stop flashing and

both Arrows and the STOP Bar icon will be On solid.

Fig. 75 - NO DECO SAFETY

STOP ALT 3

Fig. 76 - ENTRY INTO DECO

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands