ABB Relion REC670, Applications Manual

Page: 643 / 658

24.2 Voltage transformer requirements
M11608-3 v5
The performance of a protection function will depend on the quality of the measured
input signal. Transients caused by capacitive Coupled voltage transformers (CCVTs)
can affect some protection functions.
Magnetic or capacitive voltage transformers can be used.
The capacitive voltage transformers (CCVTs) should fulfill the requirements according
to the IEC 61869-5 standard regarding ferro-resonance and transients. The ferro-
resonance requirements of the CCVTs are specified in chapter 6.502 of the standard.
The transient responses for three different standard transient response classes, T1, T2
and T3 are specified in chapter 6.503 of the standard. CCVTs according to all classes
can be used.
The protection IED has effective filters for these transients, which gives secure and
correct operation with CCVTs.
24.3 SNTP server requirements
GUID-588FCD12-C494-445E-8488-8287B34EFD9A v4
The SNTP server to be used is connected to the local network, that is not more than 4-5
switches or routers away from the IED. The SNTP server is dedicated for its task, or at
least equipped with a real-time operating system, that is not a PC with SNTP server
software. The SNTP server should be stable, that is, either synchronized from a stable
source like GPS, or local without synchronization. Using a local SNTP server without
synchronization as primary or secondary server in a redundant configuration is not
recommended.
24.4 PTP requirements
GUID-741CC863-D760-49D6-85B2-AFECA222A8C3 v1
For PTP to perform properly, the Ethernet equipment that is used needs to be compliant
with IEEE1588. The clocks used must follow the IEEE1588 standard BMC (Best
Master Algorithm) and shall, for instance, not claim class 7 for a longer time than it
can guarantee 1us absolute accuracy.
1MRK 511 401-UUS A
Section 24
Requirements
Bay control REC670 2.2 ANSI 637
Application manual