ABB ACS880-01 Series, Firmware Instructions

Page: 314 / 664

314 Parameters
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit or
rises above its high limit. 5
Abs both Action is taken whenever the absolute value of the signal falls
below its (absolute) low limit or rises above its (absolute) high
limit. 6
32.16 Supervision 2
action Selects the action the drive takes when the value monitored
by signal supervision 2 exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision status .
No action
No action No action taken. 0
Warning A warning ( A8B1 Signal supervision 2 ) is generated. 1
Fault The drive trips on 80B1 Signal supervision 2 . 2
Fault if running If running, the drive trips on 80B0 Signal supervision . 3
32.17 Supervision 2
signal Selects the signal to be monitored by signal supervision
function 2.
For the available selections, see parameter
32.07
Supervision 1 signal .
Zero
32.18 Supervision 2 filter
time Defines a filter time constant for the signal monitored by
signal supervision 2. 0.000 s
0.000 … 30.000 s Signal filter time. 1000 = 1 s
32.19 Supervision 2 low Defines the lower limit for signal supervision 2. 0.00
-21474830.00 …
21474830.00 Low limit. -
32.20 Supervision 2 high Defines the upper limit for signal supervision 2. 0.00
-21474830.00 …
21474830.00 Upper limit. -
32.25 Supervision 3
function Selects the mode of signal supervision function 3. Determines
how the monitored signal (see parameter
32.27 ) is compared
to its lower and upper limits ( 32.29 and 32.30 respectively).
The action to be taken when the condition is fulfilled is
selected by
32.26 .
Disabled
Disabled Signal supervision 3 not in use. 0
Low Action is taken whenever the signal falls below its lower limit. 1
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit or
rises above its high limit. 5
No. Name/Value Description Def / FbEq16