Zero88 ILLUSION 500, Руководство по эксплуатации

Страница: 45 / 122

Position Section
The Position section is used to display
and adjust fixture position parameters
(eg Pan, Tilt) and movement effect
parameters.
The Position section contains a soft
Wheel Group Button, fixture parameter
data and a Fixture Selection area.
Wheel Group Button
This soft button performs the same
function as the WHEEL GROUP button
on the front panel, ie is used to cycle
through the groups of parameters.
Fixture Parameter Data
This section of the window shows data
on the fixture position parameters or
movement effect parameters that are
currently assigned to the three control
wheels on the front panel.
The actual fixture or movement effect
parameters displayed are determined
by the fixture type, attribute and wheel
group selected.
The following information is displayed
for each fixture parameter:
Number - The number of the
parameter within the current attribute.
Name - The name of the fixture
parameter (eg Pan, Tilt, P/T Spd).
Value - The numeric value of the
parameter. This is displayed as a
percentage or DMX value depending
on the option selected in Desk Setup.
The Movement Effect parameters have
there own ranges - see later.
Details - If the fixture parameter details
are defined in the fixture data file, this
section of the screen contains a list of
the details in increasing DMX value.
Fixture Selection Area
This section of the window contains a
soft button for each of the assigned
fixtures that has one or more position
parameters.
Selected fixtures are shown in red,
unselected fixtures in grey.
The ‘Primary Fixture’ is highlighted.
NOTE
Movement Effect Parameters
For fixtures with pan and tilt, there are six
movement effect parameters (Effect, Size X,
Size Y, Offset, Rotation and Speed).
These parameters are displayed as two
groups of position parameters after the real
position parameters for the fixture.
Illusion 500 Manual 73-741-00 Issue 2 4 - 5
Program Window
Figure 4 - 5 : Program Window - Position Section