Zero88 ILLUSION 500 Скачать руководство пользователя страница 36

Страница: 36 / 122

Autopatch In (Optional)

If a DMX In upgrade kit has been fitted
to the desk, an

Autopatch In

function is

provided which allows selected dimmer
channels and fixture brightness
parameters to be patched to DMX
input channels in a single operation.

This option is indicated by the display
of the

Autopatch In

tab in the Desk

Setup options.

The

Autopatch In

function works in the

same way as the

Autopatch Out

function, except that only dimmer
channels and fixture brightness
parameters can be patched to the
DMX In.

NOTES

Autopatch In

A DMX In channel may only be patched to

one dimmer channel or one fixture brightness

parameter.

Only the brightness parameter of selected

fixtures will be patched to the DMX In.

If any of the selected fixtures do not have a

brightness parameter, a warning message is

displayed.

If autopatching would overlap dimmer

channels or fixtures already patched, a

warning message is displayed.

The user is given the option of unpatching

the overlapping channels or fixtures and

continuing with the autopatch, or cancelling

the autopatch operation.

Clear DMX Patch

This option will allow the user to
unpatch the dimmer channels, fixtures
and auxiliaries which are patched to
the DMX outputs. It will also allow the
user to clear the DMX In patch (if
applicable).

Select the

Clear DMX Patch

tab from

the Desk Setup options.

The following options are displayed on
the screen:

Clear DMX Patch (Dimmer Channels)
Clear DMX Patch (Fixtures)
Clear DMX Patch (Auxiliaries)
Clear DMX In Patch
Clear All DMX Patches.

Use the mouse or cursor keys and
ENTER to select the required option.

A confirmation window is displayed.
Select the

Clear

button to confirm the

operation.

3 - 16

Illusion 500 Manual 73-741-00 Issue 2

Setup

Figure 3 -16 : Clear DMX Patch

Содержание ILLUSION 500



























































































































Результаты поиска

Содержание ILLUSION 500

Отзывы:

Похожие инструкции для ILLUSION 500

Бренды по названию

Популярные бренды

Zero88 ILLUSION 500, Руководство по эксплуатации

Результаты поиска

Содержание ILLUSION 500

Отзывы:

Похожие инструкции для ILLUSION 500

Бренды по названию

Популярные бренды