Zero88 ILLUSION 500, Руководство по эксплуатации

Страница: 103 / 122

Programming Cues
The following sections describe how to
add and program new cues from the
Cueline screen.
When programming cues from the
Cueline screen, it is recommended that
Stay Mode is selected (see earlier).
This prevents the Cueline screen from
jumping back to the
Current memory.
Selecting a Cue
There are several ways to select a cue:
•
Press the MEMORY button on the
front panel. The
Select Memory
window is displayed. Enter the
required cue (memory) number in
the field provided, then select the
OK button in the window.
•
Use the < and > keys on the front
panel or keyboard to scroll along the
Cueline one cue at a time.
•
Position the mouse pointer over the
required cue in the
Cue Track and
click the left mouse button.
Adding New Cues
1. Right click in the Cue Track at the
point where you wish to add or
insert a new cue (see notes). A
menu of options is displayed.
2. Select the Insert option from the
menu. The New Cue Window is
displayed.
3. The Number field contains the
default cue number, based on
where the new cue is being
inserted. This can be modified if
required (see notes).
4. Adjust the default values in the
remaining fields (optional).
5. Select the OK button in the
Window. The New Cue Window is
closed and a warning message is
displayed indicating that the
channel data for the cue has not
been programmed.
6. To edit the channel data for the
new cue, select the
Edit Live or
Edit Blind button in the window.
The PW is opened. Set the
dimmer channel and fixture
parameter levels as required, then
save the data. To leave the
channel data unprogrammed,
select the
Edit Later button.
7. When the new cue is added, its
number, type, information and
trigger data are displayed in the
Cue Track . The transition times
are displayed in the memory data
tracks. The yellow highlight bar is
displayed on the new cue.
NOTES
Memory X Go
Entering MEMORY X GO from the Cueline
screen is the equivalent of selecting Memory
x via the Select Memory window and then
pressing GO to fade to the selected memory.
Adding and Inserting Cues
To add a new cue at the end of the Cueline,
right click in the Cue Track in the area after
the last cue.
To insert a cue between two existing cues
right click near the join between the two
cues. The default cue number can be
modified if required but only in the range
between the two exisiting cues.
Illusion 500 Manual 73-741-00 Issue 2 9 - 3
Cueline
Figure 9 - 3 : New Cue Window