Zero88 ILLUSION 500, Руководство по эксплуатации

Страница: 66 / 122

Programming a Chase
Select an unprogrammed memory,
move to the
Type field and select
Chase .
Programming the Memory
Information and Trigger
Move to the Information field. Enter a
textual description of the memory.
Move to the Trigger field - select Go,
Auto or At Time as required.
If the trigger is At Time , enter the start
time under the trigger.
Programming the Delay, Fade
Transition and Dwell Times
Set up the delay, fade, transition and
dwell times for the memory by moving
to the appropriate fields and entering
the required times, using the numeric
keypad or control wheel.
Programming the Chase
Modifiers
Move to the Direction field - select
Forwards (>), Backwards (<) or
Bounce (<>) as required.
Move to the Attack field - select snap,
slow attack, slow decay or crossfade
as required.
Move to the Drive field - select Auto,
Vari Bass or Manual as required.
Move to the Speed field - adjust the
speed as required.
Programming Chase Steps
To program the first step in the chase,
press the EDIT LIVE or EDIT BLIND
button on the front panel, or right click
and select the
Edit Live or Edit Blind
option from the menu. This opens the
program Window. Step 1 is indicated
as unprogrammed (*).
Select the required build option via the
soft button in the PW header or F4
(see notes at end of this section).
Set the dimmer channel and fixture
parameter levels to the required values
(see chapter 4 for details).
Press the SAVE STEP button on the
front panel, or select the
Save Step
button in the PW. The channel data is
saved into the step and a new step is
automatically added to the end of the
chase.
To program the next step of the chase,
set the dimmer channel and fixture
parameter levels to the required
values, then press SAVE STEP.
Repeat until all the steps in the chase
have been programmed.
On the last step of the chase press the
SAVE button on the front panel, or
right click in the CDW and select the
Save option from the menu, rather than
pressing SAVE STEP.
Adjusting Chase Modifiers
To see the effects of adjusting the
chase modifiers while previewing the
chase memory:
Select a programmed chase memory.
Press the PREVIEW button on the
front panel to open the Program
Window.
The changing channel levels can be
seen in the PW. The
Modifiers section
of the PW is displayed showing the
current modifier values.
Adjust the Direction, Attack, Drive and
Speed modifiers using the front panel
buttons or by clicking on the screen
buttons in the PW with the mouse.
To save the new modifier values into
the memory press the SAVE button or
click on the
Save button in the PW.
Press the PREVIEW button to close
the Program Window.
5 - 8 Illusion 500 Manual 73-741-00 Issue 2
Memories
Figure 5 - 7: Memories Screen showing Chases