Zero88 ILLUSION 500 Скачать руководство пользователя страница 70

Страница: 70 / 122

Saving Data to a Palette

Press the SAVE AS button on the front
panel, or right click in the PW and
select the

Save As

option from the

menu. The

Save As

window is

displayed.

Select the

Colour Palette, Beamshape

Palette

Position Palette

option by

pressing the COLOUR, BEAMSHAPE
or POSITION button or clicking on the
corresponding tab in the window.

Enter the destination palette number in
the field provided.

Enter the name of the palette in the
Information field (optional).

Select the

button in the window

If the specified palette is
unprogrammed, the channel data is
programmed into the palette.

If the specified palette is already
programmed, a warning message is
displayed. Select overwrite or cancel
as required.

Save Options

When channel data is being edited live
in the PW, various save options are
available to the user.

Press F5 or click on the

Save Options

button in the PW header to display a
menu of available options.

The actual save options available will
depend on the item being edited.

Save

This option performs the normal Save
operation and is equivalent to pressing
the SAVE button.

Save As

This option performs the normal Save
As operation and is equivalent to
pressing the SAVE AS button.

Update

This option is only available when
editing a memory or submaster.

Any dimmer channels or fixture
parameters which have been changed
are saved into the item being edited.

Any outputs which originate from the
submasters or Playback A/B are not
saved.

Update Step

This option is only available when
editing a chase, sound to light or
ripplesound memory.

Any dimmer channels or fixture
parameters which have been changed
are saved into the step being edited.

Any outputs originating from the
submasters or Playback A/B are not
saved.

5 - 12

Illusion 500 Manual 73-741-00 Issue 2

Memories

Figure 5 - 11: Program Window - Save Options Menu

Содержание ILLUSION 500



























































































































Результаты поиска

Содержание ILLUSION 500

Отзывы:

Похожие инструкции для ILLUSION 500

Бренды по названию

Популярные бренды

Zero88 ILLUSION 500, Руководство по эксплуатации

Результаты поиска

Содержание ILLUSION 500

Отзывы:

Похожие инструкции для ILLUSION 500

Бренды по названию

Популярные бренды