Zero88 ILLUSION 500, Руководство по эксплуатации

Страница: 56 / 122

Wheel Editing Modes
There is a soft button in the PW header
(equivalent to F6) which defines the
wheel editing mode for each attribute.
In Brightness - this determines how the
control wheel affects the levels of the
selected dimmer channels and/or
fixture brightness parameters.
In Colour, Beamshape and Position -
this determines how the control wheel
affects the levels of the fixture
parameter assigned to the wheel for
the selected fixtures.
Click on the soft button in the header
or press F6 on the front panel to cycle
through the wheel edit modes.
The action of each of the wheel editing
modes is as follows:
Absolute - All the selected channels or
fixture parameters go to the same
absolute value, regardless of their
original values.
Relative - All the selected channels or
fixture parameters increase or
decrease by the same amount, relative
to their original values.
Proportional - All the selected
channels or fixture parameters
increase or decrease by different
amounts, depending on their original
values.
Fan-First - All the selected channels or
fixture parameters increase or
decrease by different amounts; the first
channel or fixture value is locked.
Fan-Middle - All the selected channels
or fixture parameters increase or
decrease by different amounts; the
middle channel or fixture value is
locked.
Fan-Last - All the selected channels or
fixture parameters increase or
decrease by different amounts; the last
channel or fixture value is locked.
Undoing and Redoing Edits
The UNDO EDIT and REDO EDIT
buttons on the front panel and the
Undo and Redo menu options can be
used to undo and redo dimmer channel
and fixture parameter edits from the
Program Window.
Pressing the UNDO EDIT button or
selecting the
Undo menu option will
undo the last channel or fixture
parameter edit made. The text “UNDO”
appears in the command line.
Pressing the UNDO EDIT button
several times will undo the edits one at
a time back as far as the last save or
the maximum edits (20).
Pressing the REDO EDIT button or
selecting the
Redo menu option will
redo the last dimmer channel or fixture
parameter edit that was undone. The
text “REDO” appears in the command
line.
NOTES
Undo/Redo Edits
It is not possible to undo/redo channel or
fixture parameter edits across different steps
or parts of a memory, because in order to
move to a different step or part, any edits
must first be saved or lost.
Closing the Program Window
The Program Window is closed by
clicking on the
Close (F8) button in the
header or by pressing F8 on the front
panel or keyboard.
If the PW was originally opened using
the CHANNEL, FIXTURE or GROUP
buttons, and dimmer channel or fixture
parameter levels have been adjusted,
these levels will remain on the outputs
when the PW is closed without saving.
These temporary edits to the output
levels will remain until the outputs are
altered via the Playback X, Playback
A/B or submasters.
4 - 16 Illusion 500 Manual 73-741-00 Issue 2
Program Window