Zero88 ILLUSION 500, Руководство по эксплуатации

Страница: 31 / 122

Assign Fixtures
This option allows you to assign and
patch fixtures onto the desk.
The fixture data is displayed on the
monitor screen as a table.
Below the fixture table is a colour
coded DMX map which shows where
the assigned fixtures (and dimmer
channels and auxiliaries) are patched
to the DMX outputs.
Initially no fixtures are assigned. It is
up to the user to assign the required
number and type of fixtures to match
those to be controlled in the rig.
A fixture type is defined by two fields:
Manufacturer and Type (eg Martin
MAC 250, Clay Paky Goldenscan)
Once a fixture has been assigned, it
can be patched to the DMX outputs.
Assigned fixtures can also be named,
patched to the DMX IN and associated
with dimmer channels or other fixtures
as required.
Assigning Common Fixtures
This section describes how to assign a
fixture to one of the 20 Common fixture
types permanently stored on the desk.
Select a fixture number, then move to
the
Manufacturer/Type field using the
cursor keys or mouse.
Press the ENTER key. The Assign
Fixture Type Window is displayed on
the monitor screen, with the
Manufacturer field highlighted.
Use the left/right cursor keys to select
the required manufacturer (eg Martin).
Move the cursor down to the Type field
in the window, then use the left/right
cursor keys to select the required
fixture type (eg MAC 250).
Press the ENTER key or click on the
OK button in the window to complete
the assignment.
The Assign Fixture Type Window is
closed and the selected manufacturer
and fixture type are displayed in the
fixture table.
NOTE
Common Fixture Types
The default set of 20 Common Fixture Types
on the Illusion 500 desk are as follows:
Martin MAC 250 (Mode 4)
Martin MAC 300 (Mode 4)
Martin MAC 500 (Mode 4)
Martin MAC 600 (Mode 4)
Martin MAC 2000 Prof (16 bit mode)
Martin Roboscan Pro 518 (Mode 2)
Martin Roboscan 812 (Extended)
High End Studio Colour
High End Studio Colour 250
High End Studio Spot
High End Studio Spot 250
High End Cyberlight (Mode 2)
High End Technobeam (Full Mode)
High End Trackspot
Clay Paky Goldenscan HPE
Clay Paky Stage Scan
Clay Paky Stage Color 300 (16 bit)
Clay Paky Stage Color 1200 (16 bit)
Clay Paky Stage Light 300 (16 bit)
Clay Paky Stage Zoom 1200 (16 bit).
Illusion 500 Manual 73-741-00 Issue 2 3 - 11
Setup
Figure 3 - 1 1: Desk Setup - Assign Fixtures Screen