Zeiss LSM 510, Руководство пользователя

Страница: 28 / 606

NOTES ON DEVICE SAFETY LSM 510 DuoScan
Carl Zeiss User Interface LSM 510 META DuoScan
1-24
B 45-0021 e 03/06
For NLO systems being coupled to a Chameleon or Verdi Mira Laser from Coherent using the beam
housing kit designed for LSM 510, the beam tube connecting the periscope and the scan head has to be
removed before the scan head can be dismounted. Perform the following steps for the removal of the
tube:
•
Unfasten the screw that clamps the outer tube to the inner tube (Fig. 1-21/ 3 ).
•
Pull out the tube from the periscope cover by sliding the inner tube into the outer tube (Fig. 1-21/ 6 ).
•
Turn the outer tube counter clockwise to unscrew the tube (Fig. 1-21/ 4 ) from the small black tube
which is fixed to the scan head.
•
Now the tube can be removed and you can proceed as described above.
•
For rearranging the beam housing, first screw the tube to the scan head (Fig. 1-21/ 4 ). It should not be
fastened completely to allow the inner tube to fit the side pin into the recess of the ring on the
periscope (Fig. 1-21/
1 ) and the recess of the outer tube (Fig. 1-21/ 2 ).
•
Open the shutter in the periscope using an Allen key (Fig. 1-20/ 1 ) and slide in the tube completely,
this will hold the shutter open.
Fig. 1-20 Shutter opening on the periscope.
Also applies for the large periscope
for upright microscopes. Fig. 1-21 Tube connection from the periscope
housing (7) to the scan head (5).
Applies for upright and inverted
microscopes.