YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей

Страница: 68 / 566

1.5 Replace the Drive
68 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
■
Connect the Control Circuit Terminal Block
1.
To put a wired control circuit terminal block in the drive, align it with the guides and move it straight up.
A - Guides
Figure 1.94 Put the Terminal Block into the Connector
2.
Use M3 screws to safety the terminal block.
Tighten the screws to a correct tightening torque:
• M3 screws: 0.5 N
∙
m to 0.6 N
∙
m (4.4 lbf
∙
in to 5.3 lbf
∙
in)
Figure 1.95 Safety the Terminal Block
3.
Install the front cover and the keypad to their initial positions.
4.
Check o2-04 [Drive Model (KVA) Selection] .
Note:
• When you save parameter information in a keypad that you installed before you replaced the terminal block, make sure that you use that
keypad to restore the parameter data.
•
To reset the performance life monitors for the components, set o4-01 to o4-13 [Maintenance Period] .