YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей, Страница: 483 / 566

Startup
Procedure
and
T
est
Run
6
6.6 Keypad Operation
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 483
6.
Push or to select the digit, then push or to change the value.
7.
When you complete changing the value, push .
The procedure to set the sampling time is complete.
◆
Set Backlight to Automatically Turn OFF
You can set the backlight of the keypad screen to automatically turn OFF after a set length of time since the last key
operation on the keypad. The procedure in this section shows how to turn ON and turn OFF the backlight.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Diagnostic Tools], then push .
4.
Push or to select [Backlight], then push .