YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей

Страница: 452 / 566

6.6 Keypad Operation
452 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
5.
Push or to select [Custom Monitor 1], then push .
6.
Push or to select the monitor number to register, then push .
Set the x-xx part of monitor Ux-xx . For example, to show monitor U1-05 , set it to “105” as shown in this figure.
The configuration procedure is complete.
◆
Show Custom Monitors
The procedure in this section shows how to show the registered custom monitors.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push [Back] to show [Home] on .
2.
Push [Menu].
3.
Push or to select [Monitors], then push .
4.
Push or to select [Custom Monitor], then push .
The keypad shows the selected monitor as shown in this figure.