YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей, Страница: 454 / 566

6.6 Keypad Operation
454 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
6.
Push .
7.
Push or to select the monitor number to register, then push .
Monitor Set the x-xx part of the Ux-xx . For example, to show monitor U1-01 [Frequency Reference] , set it to
"101" as shown in this figure.
The configuration procedure is complete.
◆
Show Monitors as Bar Graphs
The procedure in this section shows how to show a specific monitor as a bar graph. You can show a maximum of
three.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Display Bar Graph], then push .