YASKAWA GA800 Series, Техническое обслуживание и устранение неисправностей, Страница: 213 / 566

Parameter
List
3
3.10 H: Terminal Functions
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 213
Setting Value Function Description
A5 DWEZ Extended Digital
Output 6
Sets the DriveWorksEZ digital output 6. Refer to the DriveWorksEZ online manual for more information.
A6 DWEZ Extended Digital
Output 7
Sets the DriveWorksEZ digital output 7. Refer to the DriveWorksEZ online manual for more information.
A7 DWEZ Extended Digital
Output 8
Sets the DriveWorksEZ digital output 8. Refer to the DriveWorksEZ online manual for more information.
100 !During Run
The terminal deactivates when you input a Run command and when the drive is outputting voltage.
ON : Drive is stopping
OFF : Drive is running
101 !Zero Speed
The terminal deactivates when the output frequency is less than E1-09 [Minimum Output Frequency] or b2-01 [DC Injection/Zero
SpeedThreshold] .
Note:
Parameter A1-02 [Control Method Selection] selects which parameter is the reference.
A1-02 Setting Description Parameter Used as the Reference
0 Open Loop V/f Control E1-09
1 V/f Control with Encoder E1-09
2 Open Loop Vector b2-01
3 Closed Loop Vector E1-09
4 Advanced OpenLoop Vector Control E1-09
5 PM Open Loop Vector Control E1-09
6 PM Advanced Open Loop Vector E1-09
7 PM Closed Loop Vector Control b2-01
8 EZ Open Loop Vector Control E1-09
ON : The output frequency is the value of E1-09 or more, or b2-01 or more.
OFF : The output frequency is less than the value of E1-09 or b2-01 .
102 !Speed Agree 1
The terminal deactivates when the output frequency is in the range of the frequency reference ± L4-02 [Speed Agree Detection
Width] .
Note:
In CLV, the motor speed is the reference.
ON : The output frequency does not align with the frequency reference although the drive is running.
OFF : The output frequency is in the range of
“
frequency reference ± L4-02
”
.
103 !User-Set Speed Agree 1
The terminal deactivates when the output frequency is in the range of L4-01 [Speed Agree Detection Level] ± L4-02 [Speed Agree
Detection Width] and in the range of the frequency reference ± L4-02 .
Note:
• The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the forward/reverse
detection level.
•
When using Closed Loop Vector Control, this is the value of
“
Motor Speed ± L4-02 .
”
ON : The output frequency is not in the range of “ L4-01 ± L4-02 ” nor the range of frequency reference ± L4-02 .
OFF : The output frequency is in the range of “ L4-01 ± L4-02 ” and the range of frequency reference ± L4-02 .
104 !Frequency Detection 1
The terminal deactivates when the output frequency is higher than the value of L4-01 [Speed Agree Detection Level] + L4-02
[Speed Agree Detection Width] . When the terminal activates, it stays activated until the output frequency = L4-01 .
Note:
• The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the forward/reverse
detection level.
• In CLV, the motor speed is the reference.
ON : The output frequency is higher than L4-01 + L4-02 .
OFF : The output frequency is less than L4-01 or is not more than L4-01 + L4-02 .
105 !Frequency Detection 2
The terminal deactivates when the output frequency is higher than the value of L4-01 [Speed Agree Detection Level] . When the
terminal deactivates, it stays deactivated until the output frequency = L4-01 - L4-02 .
ON : The output frequency is less than “ L4-01 - L4-02 , ” or it is not more than L4-01 .
OFF : The output frequency is more than L4-01 .
106 !Drive Ready
The terminal deactivates when the drive is ready and running.
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV