Brine Fogging System Type SOLFOG V3
Index: 02
Change date: 19/09/2023
OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx
Page 36 of 65
WARNING!
Health hazard due to germ contamination!
Extended downtimes can cause germ contamination in containers and lines!
If the device is not used for an extended period of time, it must be emptied
and cleaned (see notices on decommissioning in Chapter 10.1 on page 57!
After a downtime of more than 7 days, always start the commissioning with a
disinfection!
8.5
Button plate function
8.6
Fog lighting function
Fig. 39: Button plate, sample illustration
Start the programme
Fog generation:
After pressing the button, the SOLFOG runs according to
the set fogging and pause times until the cycle time has ex-
pired.
Restart the programme
If a push button is pressed again after the time has expired,
the programme starts again.
Push button illumination
The push button illumination can be set individually. See
Chapter 8.7.18, Set Config / Push button illumination.
Fig. 40: Fog lighting
The fog lighting starts and ends automatically, along with
the SOLFOG’s fog generation.
