Brine Fogging System Type SOLFOG V3
Index: 02
Change date: 19/09/2023
OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx
Page 32 of 65
WARNING!
Risk of crushing!
Injury to fingers (crushing) possible!
Wear thin gloves when changing the fog maker container!
NOTICE
The disinfection must be completed and terminated with the Enter key
until the main
menu is displayed; otherwise, a new disinfection is requested.
The disinfection programme that has been started can be cancelled by switching it off at the
main switch.
Each disinfection must be documented in the disinfection protocol!
Fig. 34: Remove fog maker container
19)
Pull the Fog
(Fig. 13, No. 19) forwards
out of the bracket and remove it downwards.
20)
Empty the fog maker container, rinse it with drinking
water and then replace the empty fog maker container.
21)
Confirm the display message “Rinse, empty and insert
fog maker container” with the Enter key
.
NOTICE
The fog maker container must be empty in order to
exit the Disinfection menu using the Enter key
.
22)
Disassemble, empty and dry the politainer with the re-
sidual cleaning solution.
23)
Only then can the politainer be reused for the next dis-
infection!
Fig. 35: Menu: New brine container
24)
Connect and attach a new brine politainer.
25)
Confirm the display message
Put on brine con-
tainer
with the Enter key
.
The display returns to the main menu.
The device is ready for operation again.
