Brine Fogging System Type SOLFOG V3
Index: 02
Change date: 19/09/2023
OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx
Page 35 of 65
8.2
Check for operational readiness
Check whether the power supply is ensured; connect the device, if necessary.
Check the brine level in the politainer; replace politainer, if necessary.
Check the fragrance oil concentrate level; replenish fragrance oil concentrate, if nec-
essary.
Check connections and peristaltic pump for leaks; restore proper seal, if necessary.
Check whether a disinfection is required; carry out disinfection, if necessary.
8.3
Operation
The device is operated via the operating buttons next to the LCD display.
8.4
Switching on / off
NOTICE
When the device is switched on for the first time after commissioning or after a reset, it starts
automatically with the start query (see Chapter 7.7.1 on page 26).
The device is switched on at the main switch (Fig. 38, No. 03); it starts and is in the most recently
selected operation mode.
The device is switched off at the main switch (Fig. 38, No. 03). The operating parameters are
saved.
Fig. 38: Control unit with display
02
Control housing
03
Main switch
71
Display
72
3 operating buttons:
Navigation upwards
Use the arrow key to navigate up-
wards or set numerical values.
Enter
key
Use the Enter key to navigate to
the selected submenu or to the
next setting value or to confirm the
setting value.
Navigation downwards
Use the arrow key to navigate
downwards or set numerical val-
ues.
73
Dosing pump
02
73
03
72
71
