Brine Fogging System Type SOLFOG V3
Index: 02
Change date: 19/09/2023
OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx
Page 13 of 65
3.3
Functional description
The brine fog maker SOLFOG V3 is used to create a saline ocean climate in relaxation rooms,
saline rooms, infrared cabins and saunas. The brine fog maker vaporises the brine by means of
an ultrasonic fog maker. The vaporised brine is conducted into the cabin via an air stream gen-
erated by the fan.
A level switch is used to control a peristaltic pump (Fig. 1, No. 04), which feeds additional brine
into the fog maker container. This replaces the consumed brine.
Optionally, a fragrance can also be blown into the room along with the fog. For this purpose, the
fragrance container (Fig. 1, No. 15) must be filled up to the mark (maximum 50 ml) with a fra-
grance oil concentrate for room scenting, and a filter star must be inserted. The fan blows the
evaporating fragrance oil concentrate through a non-return valve (Fig. 1, No. 14) into the fog
maker container. There, the fragrance oil concentrate mixes with the brine fog and is blown into
the connected cabin.
By default, the device is started with the main switch. Optionally, the device can be controlled
via a push button from the cabin or via an external signal.
Operation without brine
If the SOLFOG is only to be used to vaporise water instead of brine, this can be done with a water
politainer or a fixed water connection. With a direct connection to the water line, the politainer
is replaced by a fixed ½” water connection and a solenoid valve.
3.4
Description of components
3.4.1
Control unit
3.4.2
Brine dosing
Fig. 2: Control unit
The control unit consists of the control housing
(Fig. 1, No. 02) with protection class IP64.
The electronic components are installed in the
housing.
On the control unit, the operating parameters can
be set on a 5-line LCD display by means of 3 oper-
ating buttons.
Fig. 3: Peristaltic pump function
Brine dosing is performed using a peristaltic pump
(Fig. 1, No. 04), which can reliably transport even
the smallest dosing quantities; even when air or
gas bubbles are trapped in the suction line.
The rotating rollers press the dosing hose against
the wall, which pushes the liquid in the hose out in
front of the rollers while simultaneously sucking
more liquid in behind them.
The peristaltic pump is exceptionally reliable and
also very easy to operate.
