Brine Fogging System Type SOLFOG V3
Index: 02
Change date: 19/09/2023
OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx
Page 41 of 65
8.7.7
Set fan rotation speed
NOTICE
During a disinfection, the fan always runs at full performance.
8.7.8
Check electrical outputs
NOTICE
The control unit does not switch automatically from the test menu to the main menu. The test
menu must actively be terminated with
Esc
to return to the main menu.
Fig. 50: Menu: Fan
The fan rotation speed (in percent) determines the
strength of the air flow with which the vaporised brine is
supplied to the cabin.
1)
Select the
Fan
entry in the main menu and confirm
with the Enter key
.
2)
Use the arrow keys to select the speed in percent and
save with the Enter key
.
The display returns to the main menu.
Fig. 51: Menu: Test outputs
You can test the different electrical outputs in this sub-
menu.
1)
Select the
Test outputs
entry in the main menu and
confirm with the Enter key
.
2)
Select the desired component using the arrow keys and
confirm with the Enter key
.
3)
The display counts down the respective remaining con-
trol time (sample display: pump with 3 seconds remain-
ing time):
Pump
: 5 seconds
Fan
: 20 seconds
Fogger
: 20 seconds
(Collective) Fault
: 20 seconds
Button
: 20 seconds
The test can be cancelled at any time using the Enter
key
.
Once the respective test has been completed, the dis-
play switches back to the overview of the outputs.
4)
In the overview, select the
Esc
entry to navigate to the
main menu.
