Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 63 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

CAUTION

To reduce the risk of sliding under
the lap belt during a collision, avoid

reclining the seatback any more than

needed. The seat belts provide maxi-
mum protection in a frontal or rear

collision when the driver and the

front passenger are sitting up straight
and well back in the seats. If you are

reclined, the lap belt may slide past

your hips and apply restraint forces
directly to the abdomen. In the event

of a frontal collision, the more the

seat is reclined, the greater the risk
of personal injury.

1. SEAT POSITION, SEAT CUSHION

ANGLE AND SEAT HEIGHT

ADJUSTING SWITCH

Move the adjusting switch in the de-

sired direction.

Releasing the switch will stop the seat at

that position.
Do not place anything under the front
seats, as this might interfere with the seat

movement.

2. SEATBACK ANGLE ADJUSTING

SWITCH

Move the adjusting switch in the de-
sired direction.

Releasing the switch will stop the seat-
back at that position.

—Adjusting front seats (power

seat)

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды