Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 110 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,
because the front passenger airbag

could inflate with considerable

speed and force. Otherwise, the
child may be killed or seriously in-

jured.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or
any part of his/her body against the

door or the area of the seat, front

or rear pillar or roof side rail from
which the side airbags or curtain

shield airbags deploy even if the

child is seated in the child restraint
system. It is dangerous if the side

airbag and curtain shield airbag in-

flate, and the impact could cause
death or serious injury to the child.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-

ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,

the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury

to the child or other passengers in

the event of collision.

Make sure that you have complied

with all installation instructions pro-
vided by the child restraint

manufacturer and that the system is

properly secured. If it is not se-
cured properly, it may cause death

or serious injury to the child in the

event of a sudden stop or accident.

A child restraint system for a small

child or baby must itself be properly

restrained on the seat with the lap por-
tion of the lap/shoulder belt. You must

carefully consult the manufacturer’s in-

structions which accompany the child
restraint system.

To provide proper restraint, use a child

restraint system following the manufactur-
er’s instructions about the appropriate age

and size of the child for the child restraint

system.
Install the child restraint system correctly

following the instructions provided by its
manufacturer. General directions are also

provided under the following illustrations.
The child restraint system should be
installed on the rear seat. According to

accident statistics, the child is safer when
properly restrained in the rear seat than

in the front seat.
When not using the child restraint system,
keep it secured with the seat belt or place

it somewhere other than the passenger

compartment. This will prevent it from in-
juring passengers in the event of a sud-

den stop or accident.

—Child restraint system

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды