Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 121 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Move seat

fully back

CAUTION

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,
because the front passenger airbag

could inflate with considerable

speed and force. Otherwise, the
child may be killed or seriously in-

jured.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar or roof side rail from

which the side airbags or curtain
shield airbags deploy even if the

child is seated in the child restraint

system. It is dangerous if the side
airbag and curtain shield airbag in-

flate, and the impact could cause

death or serious injury to the child.

Same angle

Same position

When installing a child restraint
system in the second seat center

position, adjust both seat cushions

to the same position and align both
seatbacks at the same angle. Other-

wise, the child restraint system can-

not be securely restrained and this
may cause death or serious injuries

in a collision.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды