Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 77

Страница: 77 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Front seats

Second seats

Third seats

For your safety and comfort, adjust the

head restraint before driving.

To raise: Pull it up.
To lower: Push it down while pressing the

lock release button.
Front head restraints only—On some mod-

els, you can also move the front head

restraint forward or backward. If such ad-
justment is desired, pull or push the base

of the head restraint.

Second and third seat head restraints—

When an occupant sits in the second or

third seat, always raise the head restraint
to the lock position.
The head restraint is most effective when

it is close to your head. Therefore, using
a cushion on the seatback is not recom-

mended.

CAUTION

Adjust the center of the head re-
straint so that it is closest to the

top of your ears.

After adjusting the head restraint,
make sure it is locked in position.

Do not drive with the head re-
straints removed.

Head restraints

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды