Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 118 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Do not install a child restraint sys-
tem on the second (or third) seat if

it interferes with the lock mecha-

nism of the front (or second) seats.
Otherwise, the child or front (or

second) seat occupant(s) may be

killed or seriously injured in case
of sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe
installation, install the child re-

straint system on the right second

seat.

Same angle

Same position

When installing a child restraint
system in the second seat center

position, adjust both seat cushions

to the same position and align both
seatbacks at the same angle. Other-

wise, the child restraint system can-

not be securely restrained and this
may cause death or serious injuries

in a collision.

1. Run the lap and shoulder belt through

or around the convertible seat following
the instructions provided by its

manufacturer and insert the tab into

the buckle taking care not to twist the
belt. Keep the lap portion of the belt

tight.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды