Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 174 / 420

’04 HIGHLANDER_U (L/O 0308)

150

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

The traction control system automatical-

ly helps prevent the spinning of front

wheels when the vehicle is started or
accelerated on slippery road surfaces.

When the ignition key is turned to “ON”,

the system automatically turns on.

CAUTION

Under certain slippery road condi-
tions, full traction of the vehicle and

power against front wheels cannot be

maintained, even though the traction
control system is in operation. Do not

drive the vehicle under any speed or

maneuvering conditions which may
cause the vehicle to lose traction

control. In situations where the road

surface is covered with ice or snow,
your vehicle should be fitted with

snow tires or tire chains. Always

drive at an appropriate and cautious
speed for the present road condi-

tions.

NORMAL DRIVING MODE
Leave the system on during the ordi-
nary driving so that it can operate

when needed.

You may hear a sound in the engine

compartment for a few seconds when the

engine is started or just after the vehicle
begins to move. This means that the trac-

tion control system is in the self

−

check

mode, but does not indicate a malfunction.

When the traction control system is oper-

ating, the following conditions occur:

The system controls the spinning of the
front wheels. At this time, the slip indi-

cator light blinks.

You may feel vibration or noise in your

vehicle, caused by operation of the

brakes. This indicates the system is
functioning properly.

The slip indicator light comes on for a few

seconds when the ignition key is turned
to “ON”. If the indicator light does not

come on when the ignition is turned on,

contact your Toyota dealer.

Traction control system

(two

−

wheel drive models)

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды