Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 159

Страница: 159 / 420

’04 HIGHLANDER_U (L/O 0308)

135

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

(i) Open Door Warning Light and Buzz-

This light remains on until all the side
doors and back door are completely

closed.
If the vehicle speed rises above 5 km/h

(3 mph) with any door open, a buzzer

sounds.

(j) Automatic Transmission Fluid

Temperature Warning Light

This light warns that the automatic trans-

mission fluid temperature is too high.
If this light comes on while you are driv-
ing, slow down and pull off the road. Stop

the vehicle at a safe place and put the

selector lever in “P”. With the engine id-
ling, wait until the light goes off. If the

light goes off, you can start the vehicle
again. If the light does not go off, call a

Toyota dealer or qualified repair shop for

assistance.

NOTICE

Continued driving with the warning
light on may damage the automatic

transmission.

(k) SRS Warning Light
This light will come on when the igni-

tion key is turned to the “ON” position.
After about 6 seconds, the light will go

off. This means the systems of the air-

bag and front seat belt pretensioners
are operating properly.

This warning light system monitors the
airbag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-

sors, curtain shield airbag sensors, driv-
er’s seat position sensor, driver’s seat belt

buckle switch, front passenger occupant

classification system, “AIRBAG ON” indi-
cator light, “AIRBAG OFF” indicator light,

front passenger’s seat belt buckle switch,

seat belt pretensioner assemblies, inflat-
ors, warning light, interconnecting wiring

and power sources.
If either of the following conditions occurs,

this indicates a malfunction somewhere in

the parts monitored by the warning light
system. Contact your Toyota dealer as

soon as possible to service the vehicle.

The light does not come on when the
ignition key is turned to the “ON” posi-

tion, remains on for more than 6 sec-

onds or flashes.

The light comes on or flashes while

driving.

If the light stays on, it indicates that the

SRS driver and front passenger airbag

system and/or front passenger occupant
classification system and “AIRBAG ON”

and “AIRBAG OFF” indicator lights have a

problem. If the light flashes, the SRS side
airbag system and/or curtain shield airbag

system have a problem.

(l) “VSC” Warning Light

This light warns that there is a problem

somewhere in the vehicle stability control
system or traction control system.
The light will come on when the ignition

key is turned to “ON”, and will go off after
a few seconds.
If the light comes on while driving, the
system does not work. However, as con-

ventional braking operates when applied,

there is no problem to continue your driv-
ing.
In the following cases, contact your Toyota
dealer:

The warning light does not come on

after the ignition key is turned to “ON”.

The warning light remains on after the

ignition key is turned to “ON”.

The warning light comes on while driv-

ing.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды