Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 312 / 420

’04 HIGHLANDER_U (L/O 0308)

312

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Do not drive in excess of the speed
limit. Even if the legal speed limit

permits it, do not drive over 140

km/h (85 mph) unless your vehicle
has high

−

speed capability tires.

Driving over 140 km/h (85 mph) may

result in tire failure, loss of control
and possible injury. Be sure to con-

sult a tire dealer to determine

whether the tires on your vehicle
are high

−

speed capability tires or

not before driving at such speeds.

Do not continue normal driving
when the brakes are wet. If they are

wet, your vehicle will require a
longer stopping distance, and it

may pull to one side when the

brakes are applied. Also, the park-
ing brake will not hold the vehicle

securely.

When driving your vehicle off

−

road, please

observe the following precautions to en-

sure your driving enjoyment and to help

prevent the closure of areas to off

−

road

vehicles.

a. Drive your vehicle only in areas where

off

−

road vehicles are permitted to trav-

el.

b. Respect private property. Get owner’s

permission before entering private prop-

erty.

c. Do not enter areas that are closed.

Honor gates, barriers and signs that re-

strict travel.

d. Stay on established roads. When condi-

tions are wet, driving techniques should

be changed or travel delayed to pre-

vent damage to roads.

For owners in U.S. mainland, Hawaii and
Puerto Rico:
To obtain additional information pertaining

to driving your vehicle off

−

road, consult

the following organizations.

State and Local Parks and Recreation
Departments

State Motor Vehicle Bureau

Recreational Vehicle Clubs

U.S. Forest Service and Bureau of

Land Management

CAUTION

Always observe the following precau-
tions to minimize the risk of serious

personal injury or damage to your ve-

hicle:

Drive carefully when off the road.

Do not take unnecessary risks by

driving in dangerous places.

Do not grip the steering wheel

spokes when driving off

−

road. A

bad bump could jerk the wheel and

injure your hands. Keep both hands

and especially your thumbs on the
outside of the rim.

Always check your brakes for effec-
tiveness immediately after driving in

sand, mud, water or snow.

After driving through tall grass,
mud, rock, sand, rivers, etc., check

that there is no grass, bush, paper,

rags, stone, sand, etc. adhering or
trapped on the underbody. Clear off

any such matter from the under-

body. If the vehicle is used with
these materials trapped or adhering

to the underbody, a breakdown or

fire could occur.

Off

−

road driving precautions

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды