Toyota 2004 HIGHLANDER, Руководство пользователя

Страница: 205 / 420

’04 HIGHLANDER_U (L/O 0308)
181
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
1. “+
−
” switch
Push “+” to increase the volume. The vol-
ume continues to increase while the
switch is being pushed.
Push “
−
” to decrease the volume. The
volume continues to decrease while the
switch is being pushed.
2. “
ƜƝ
” switch
Radio
This switch has the following features—
To select a preset station:
Quickly push and release the “
Ɯ
” or “
Ɲ
”
side of the switch. Do this again to select
the next preset station.
To seek a station:
Push and hold the “
Ɯ
” or “
Ɲ
” side of the
switch until you hear a beep. Do this
again to find the next station. If you push
the switch on either side during the seek
mode, seeking will be cancelled.
To step up or down the frequency, push
and hold the switch even after you hear
a beep. When you release from the
switch, the radio will begin seeking up or
down for a station. Do this again to find
the next station.
Cassette player
This switch has the following features—
To skip to a different track in either direc-
tion:
Quickly push and release the “
Ɯ
” or “
Ɲ
”
side of the switch. “FF 1” or “REW 1” will
appear on the display.
Next, push either side of the track switch
until the track you want to listen to is set.
If you push the switch ten times, the skip
function will turn off. (You can skip up to
nine tracks at a time.)
When counting the number of the tracks
you want to rewind, remember to count
the current track as well. For example, if
you want to rewind to a song that is two
tracks before the song you are listening
to, push the “
Ɲ
” side of the switch three
times.
If you push the track switch further than
you wanted to, push the other side of the
switch. The track number will be in-
creased or reduced.
The track number you select is not valid
if it is higher than the number of the
tracks remaining on the current side of
the cassette.
D
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
D
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
There must be at least 3 seconds of blank
space between tracks for the track switch
to work correctly. In addition, the feature
may not work well with some spoken, live,
or classical recordings.
To fast forward or reverse:
Push and hold the “
Ɯ
” side of the switch
to fast forward a cassette tape. “FF” will
appear on the display. Push and hold the
“
Ɲ
” side of the switch to rewind a tape.
“REW” will appear on the display.
To stop the tape while it is fast forward-
ing, push the “
Ɯ
” side of the switch. To
stop the tape while it is rewinding, push
the “
Ɲ
” side of the switch.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast forwards completely,
the cassette will play the other side of the
tape using the auto
−
reverse feature.