Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 70 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

From front

From rear

1. SEATBACK ANGLE ADJUSTING

STRAP

Lean forward and pull the strap toward
you. Then lean back to the desired

angle and release the strap.

2. SEATBACK ANGLE ADJUSTING

LEVER

Pull down the lever, then adjust the
seatback to the desired angle and re-

lease the lever.

CAUTION

Do not adjust the seat while the
vehicle is moving.

Be careful that the seat does not

hit a passenger or luggage.

To reduce the risk of sliding under
the lap belt during a collision,

avoid reclining the seatback any

more than needed. The seat belts
provide maximum protection in a

frontal or rear collision when the

passengers are sitting up straight
and well back in the seats. If you

are reclined, the lap belt may slide

past your hips and apply restraint
forces directly to the abdomen. In

the event of a frontal collision, the

more the seat is reclined, the great-
er the risk of personal injury.

After adjusting the seatback, push
your body back against the seat to

make sure the seat is locked in

position.

—Adjusting third seat

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды