Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 58 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Key off operation:

If all the side doors

and back door are closed, it works for 43

seconds even after the ignition switch is
turned off. It stops working when either

front door is opened.

Jam protection function:

If something gets caught between the

moon roof and frame during slide clos-
ing operation, the moon roof stops and

then opens slightly.

If something gets caught between the
moon roof and frame during tilting

down operation, the moon roof stops

and then tilts up fully.

If the moon roof receives a strong impact,

this function may work even if nothing is
caught.

If the battery is disconnected or run
down,

the moon roof may not operate

automatically and the jam protection func-

tion will not function correctly after you
reconnect, replace or recharge the battery.

In any of these cases, you should normal-

ize the moon roof.
To normalize the moon roof, push and

hold the switch toward the “TILT UP” side.

The moon roof will tilt up and down, then
slide open and close. After the slide close

operation, release the switch.

Make sure that the moon roof opens and

closes automatically. If the moon roof can-

not be operated properly, have it checked
by your Toyota dealer.

CAUTION

To avoid serious personal injury, you
must do the following.

While the vehicle is moving, always

keep the heads, hands and other
parts of the bodies of all occupants

away from the roof opening. Other-

wise, they could be seriously in-
jured if the vehicle stops suddenly

or if the vehicle is involved in an

accident.

Before you close the moon roof,

always make sure there is nobody
around the moon roof. You must

also make sure nobody places his

or her head, hands and other parts
of the body in the roof opening. If

someone’s neck, head or hands get

caught in the closing roof, it could
result in a serious injury. When

anyone closes the moon roof, first

make sure it is safe to do so.

Be sure to remove the ignition key
when you leave your vehicle.

Never leave anyone (particularly a

small child) alone in your vehicle,
especially with the ignition key still

inserted. Otherwise, he/she could

use the moon roof switch and get
trapped in the roof opening. Unat-

tended person (particularly a small

child) can be involved in a serious
accident.

Never sit on top of the vehicle
around the roof opening.

Never try jamming any part of your
body to activate the jam protection

function intentionally.

The jam protection function may
not work if something gets caught

just before the moon roof is fully

closed.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды