Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 96 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

If the light stays on, it indicates that the

SRS driver and front passenger airbag

system and/or front passenger occupant
classification system and “AIRBAG ON”

and “AIRBAG OFF” indicator lights have a

problem. If the light flashes, the SRS side
airbag system and/or curtain shield airbag

system have a problem.
The SRS warning light and “AIRBAG OFF”
indicator light will come on if there is a

malfunction in the front passenger occu-

pant classification system.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS front airbags have been in-

flated.

The front of the vehicle (shaded in the

illustration) was involved in an accident

that was not severe enough to cause
the SRS front airbags to inflate.

The pad section of the steering wheel
or front passenger airbag cover

(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды