Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 180 / 420

’04 HIGHLANDER_U (L/O 0308)

156

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

LOW TIRE PRESSURE WARNING LIGHT

This light comes on when the ignition key
is turned to the “ON” position. It goes off

after a few seconds. This indicates that
the tire pressure warning system is func-

tioning properly.

If the low tire pressure warning light
comes on or blinks while driving, do

the following.

If the warning light comes on:

1. Adjust the tire inflation pressure to

the specified level as soon as pos-
sible. (See “Tires” on page 402 in

Section 8.)

2. Push the tire pressure warning sys-

tem reset switch for a few seconds

and make sure the warning light
goes off.

If the light remains on after the reset

switch has been pushed, have the tire
pressure warning system checked at your

Toyota dealer.
If you have a flat tire, replace it with the

spare tire. For details, see “If you have

a flat tire” on page 329 in Section 4.

If the warning light blinks slowly (every

0.5 seconds):

The low tire pressure warning system may

be malfunctioning. Contact your Toyota

dealer.

If the warning light blinks rapidly (every

0.25 seconds):

The low tire pressure warning system

needs to be initialized. Reset the system

with the tire pressure warning system re-
set switch. (To reset the system, see

“TIRE PRESSURE WARNING SYSTEM

RESET SWITCH”.)

The tire pressure warning system does

not function properly under certain cir-

cumstances. In the following cases, the
low tire pressure warning light may not

come on even if the tire inflation pres-

sure is low, or it may come on when
the tire inflation pressure is actually

normal.

A compact spare tire, snow tires, or
tire chains are used.

The tire inflation pressure is excessive-
ly higher than specified, or tire inflation

pressure suddenly drops due to burst-

ing or other causes.

The vehicle is driven on a slippery

road surface such as rough or frozen

roads.

The vehicle speed is less than 30 km/h

(19 mph) or more than 100 km/h (62
mph), and the driving duration is less

than 5 minutes.

The tires differ in tread pattern or

manufacturer.

The tires are not the specified size.

The tread wear is very different among

the installed tires.

Rapid acceleration/deceleration or

sharp turns is continued.

Towing a trailer.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды